Stalling and unable to adjust idle speed 04 Crown Vic

Have a question or in need of assistance?
Post Reply
mustangman1992
Private First Class
Private First Class
Posts: 16
Joined: Tue Jun 20, 2017 8:21 pm

Stalling and unable to adjust idle speed 04 Crown Vic

Post by mustangman1992 » Wed Nov 01, 2017 10:23 am

Hello! I just recently started using the Special Forces software, and I'm starting to get the hang of it. The only problem I'm having is I cannot get the idle speed to adjust. No matter what I said it too it doesn't seem to change. Also a lot of the time when I come to a stop the Idol begins hunting up and down and sometimes the car stalls... Any help or advice would be greatly appreciated!

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 538
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: Stalling and unable to adjust idle speed 04 Crown Vic

Post by Sniper Chris » Wed Nov 01, 2017 2:20 pm

Depending on year make and model, some of the adjustable parameters aren't supported.
What type of modifications are done to the vehicle?
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

mustangman1992
Private First Class
Private First Class
Posts: 16
Joined: Tue Jun 20, 2017 8:21 pm

Re: Stalling and unable to adjust idle speed 04 Crown Vic

Post by mustangman1992 » Wed Nov 01, 2017 2:23 pm

It's a 04 Crown Vic bone stock motor, single 76mm turbo, lightning MAF set up as straw through

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 538
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: Stalling and unable to adjust idle speed 04 Crown Vic

Post by Sniper Chris » Thu Nov 02, 2017 10:05 am

Is there a blow off valve installed? If so, is it before or after MAF and is it dumping into atmosphere or back into intake?
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

mustangman1992
Private First Class
Private First Class
Posts: 16
Joined: Tue Jun 20, 2017 8:21 pm

Re: Stalling and unable to adjust idle speed 04 Crown Vic

Post by mustangman1992 » Thu Nov 02, 2017 2:21 pm

There is a blow off valve. It is located after the turbo and after mass air flow sensor and it vents back into the intake before the turbo...

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 538
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: Stalling and unable to adjust idle speed 04 Crown Vic

Post by Sniper Chris » Fri Nov 03, 2017 10:31 am

"vents back into the intake before the turbo" Back in front of the MAF or after?
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

mustangman1992
Private First Class
Private First Class
Posts: 16
Joined: Tue Jun 20, 2017 8:21 pm

Re: Stalling and unable to adjust idle speed 04 Crown Vic

Post by mustangman1992 » Fri Nov 03, 2017 12:26 pm

After the MAF


Post Reply

Return to “Special Forces Help”