I am trying to load a tune back on my truck after doing some engine light trubeshooting. I amd attacing cable from interface to vehicle waiting for all green lights, selecting my tune,pressing be and watching for 3 & 4 to flash. I turn the key to the on position{NOT STARTING). Light 5 and 6 go green, 7 red, 1 flashes 6 times and 2 once. The theft flashes fast, the fan never comes on, after a while the theft light slows down, after 10 minutes, I turned off and unplugged. I have done this several times.....

It sounds like your truck computer has been erased. You will need to give us a call when you can be at your pc (with the Sniper software) with the Interface box.

I will try to call on tuesday

Chris,
After calling, I reloaded my stock file from #5 locationworked like textbook). I have tried to load a tune from position 1 and 2, but I get the same problem. # 1 light blinks 6 times and #2 blinks 1 time. Also my theft light blinks 1 time then 6 times, but not coinciding with the interface. It also never turns on the fan like it should. I als noticed my stock file which was in 2 locations 5 & 6 in now just on 5

Would there be some thing wrong with my file? I am attaching file befow to see if something is corrupted(that you can see)

Chris , it looked as if file did not attach last time. got a message pcm file not allowed

email it to snipertuned@yahoo.com