96 Cobra question

4.6L Modular 4 valve engine and 4.6L Modular 2 valve engine
Post Reply
User avatar
drakkhen_20
Specialist
Specialist
Posts: 30
Joined: Thu Sep 27, 2007 4:54 pm

96 Cobra question

Post by drakkhen_20 » Wed Oct 18, 2017 11:29 pm

It's been a long time since I've messed with this stuff. Like over ten years. I've had a Cobra for two now. I was wondering can you tune for IMRC deletes in Special Forces ?
98 GT Convertable Laser Red
Steeda AirFilter
Sniper M.A.F. Sensor w/95mm housing
MSD Coils and Wires
Sniper Tuned
BBK Underdrive Pulleys
BBK H-pipe no Cats
Flowmasters

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 562
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: 96 Cobra question

Post by Sniper Chris » Thu Oct 19, 2017 9:37 am

Depending on how old your tuning kit is, you may or may not be able to disable IMRC with Special Forces. I know the last two versions did allow for IMRC deletes but older versions did not.
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

User avatar
drakkhen_20
Specialist
Specialist
Posts: 30
Joined: Thu Sep 27, 2007 4:54 pm

Re: 96 Cobra question

Post by drakkhen_20 » Thu Oct 19, 2017 6:30 pm

Ok how do I tell what I have ? Also I have windows 10 and some stuff doesn't work. So do I have to pay for an update or something?
98 GT Convertable Laser Red
Steeda AirFilter
Sniper M.A.F. Sensor w/95mm housing
MSD Coils and Wires
Sniper Tuned
BBK Underdrive Pulleys
BBK H-pipe no Cats
Flowmasters

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 562
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: 96 Cobra question

Post by Sniper Chris » Fri Oct 20, 2017 10:22 am

To know what version you have there should be a small round decal on the interface box with a hand written number. If that's not there anymore then you would need to install the software and open it up. Once open you can go through the Special Forces questions to see if the IMRC question is there or not.
If you have an older version then as you mentioned, it may not work with Windows 10 (actually an issue with 64bit OS). If this is the case you can send the kit in to be updated. The charge for this is $100 plus shipping. However, keep in mind that the Recon has been discontinued (although it's still included) so it will not work with a 64bit OS.
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

User avatar
drakkhen_20
Specialist
Specialist
Posts: 30
Joined: Thu Sep 27, 2007 4:54 pm

Re: 96 Cobra question

Post by drakkhen_20 » Mon Oct 23, 2017 1:36 pm

Ok, I'll check it out. I don't have it installed anymore and I have to find it. It's still in the original box somewhere. Been moving around a lot. What number am I wanted to find on that sticker ? I've seen it just never paid attention to it.
98 GT Convertable Laser Red
Steeda AirFilter
Sniper M.A.F. Sensor w/95mm housing
MSD Coils and Wires
Sniper Tuned
BBK Underdrive Pulleys
BBK H-pipe no Cats
Flowmasters

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 562
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: 96 Cobra question

Post by Sniper Chris » Tue Oct 24, 2017 10:03 am

Should be version 19 or higher. It's possible that v14-15 may be ok too but I'm not 100% sure. We no longer have the older versions to our disposal so I'm not able to confirm that.
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

Post Reply

Return to “1996 - 2004 Mustang and Cobra”