Bazooka meter info

Sniper Bazooka MAF Meter Questions and Answer Forum
sniperpat469
General of the Army
General of the Army
Posts: 427
Joined: Fri Jul 20, 2007 2:53 pm

Bazooka meter info

Postby sniperpat469 » Mon Jul 23, 2007 3:15 pm

Here is some info on the Bazooka MAF meter

http://www.snipertuning.com/new/product ... 22&large=1


Patrick
Image

HollywoodRacing
First Sergeant
First Sergeant
Posts: 80
Joined: Fri Jul 20, 2007 6:55 pm
Location: Phoenix, AZ
Contact:

Re: Bazooka meter info

Postby HollywoodRacing » Mon Jul 23, 2007 5:29 pm

Talk about Bling ! Those meters not only work very well they look awesome too :D
Hollywood Racing
Phoenix, AZ
http://www.Hollywoodracing.net
Mathew 602-757-0158
Evan 602-757-0066

Rhynotune
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 110
Joined: Mon Jul 23, 2007 1:31 pm

Re: Bazooka meter info

Postby Rhynotune » Mon Jul 23, 2007 5:50 pm

I don't know how many i've tuned, (quite a few) but I can tell you the transfer function is spot on.

I like to lower the airmass displacement of one cylinder a little but you don't have to.

So far they have all dialed in much better than other MAF's i've used.

New technology sure makes a difference. :P
Ryan
RHYNOTUNE
rhynotune@gmail.com
Sniper Delta Force Tuner and Dealer

AIM: RyanatSDM

User avatar
geoffav
Second Lieutenant
Second Lieutenant
Posts: 362
Joined: Mon Jul 23, 2007 7:35 pm
Location: Enterprise, AL
Contact:

Re: Bazooka meter info

Postby geoffav » Wed Jul 25, 2007 1:12 am

I'll have to make sure it will work with my MRT CAI before going that way. They look very nice. ;)
Geoff
04 Mach1 Torch Red 5spd w/281 CobraJet Engine
03 Mach1 Azure Blue 5spd w/281 CobraJet Engine
33 Ford 3 Window, 4.6DOHC stack intake

http://www.weevilcitycruisers.com/index.html

User avatar
rdy2rac
Corporal
Corporal
Posts: 25
Joined: Tue Jul 24, 2007 6:06 pm

Re: Bazooka meter info

Postby rdy2rac » Wed Jul 25, 2007 2:04 am

the accuracy on those meters are second to none. i'm only running a Velocity housing because it transitioned to my pipe work better. the element itself is from the bazooka.

i've seen almost 800rwhp to the tire and no hint of pegging.
Image
760rwhp @ 28 psi w/ a 75 shot ready to go
PAXTON NOVI 2000 BLOWN GEN2 LIGHTNING
PAXTON GEN2 ON DYNO VIDEO

bgrd351
Command Sergeant Major
Command Sergeant Major
Posts: 107
Joined: Tue Jul 24, 2007 8:10 am

Re: Bazooka meter info

Postby bgrd351 » Thu Jul 26, 2007 9:19 am

now...if they are so accurate, and I am sure they are, would it be worth swapping out my stock one on the Mach 1 for this before I shoot for the moon on power in about a year or is a waste until then?

User avatar
geoffav
Second Lieutenant
Second Lieutenant
Posts: 362
Joined: Mon Jul 23, 2007 7:35 pm
Location: Enterprise, AL
Contact:

Re: Bazooka meter info

Postby geoffav » Sat Jul 28, 2007 2:02 pm

So if I install Bazooka, select Mass brand Sniper, and select Sniper 3000 --------- I'm set???

Do all models have IAT?

Are there measurements available for the units offered? I want to make sure they will fit my current configuration.
Geoff
04 Mach1 Torch Red 5spd w/281 CobraJet Engine
03 Mach1 Azure Blue 5spd w/281 CobraJet Engine
33 Ford 3 Window, 4.6DOHC stack intake

http://www.weevilcitycruisers.com/index.html

User avatar
geoffav
Second Lieutenant
Second Lieutenant
Posts: 362
Joined: Mon Jul 23, 2007 7:35 pm
Location: Enterprise, AL
Contact:

Re: Bazooka meter info

Postby geoffav » Sun Jul 29, 2007 12:32 pm

I found most every answer to the above questions in the new SF user guide. We may have to consider it for my son's GT as well. It's getting the P0113 code on second start up again. I swapped in a different Lightning MAF and it went away for awhile. :cry:
Geoff
04 Mach1 Torch Red 5spd w/281 CobraJet Engine
03 Mach1 Azure Blue 5spd w/281 CobraJet Engine
33 Ford 3 Window, 4.6DOHC stack intake

http://www.weevilcitycruisers.com/index.html

User avatar
Ryan Skaggs
Private
Private
Posts: 2
Joined: Fri May 06, 2011 9:36 pm
Location: Peoria, Illinois
Contact:

Re: Bazooka meter info

Postby Ryan Skaggs » Sat May 07, 2011 10:46 pm

geoffav wrote:It's getting the P0113 code on second start up again.


I've been having this issue as well, using a Pro-M 92mm MAF. Did a quick search and found this thread, but didn't see any further discussion on it. The car runs great an idles much better than it did before any tuning, so I wasn't sure what the deal is with the code...
2003 mach 1 - Aluminator w/ COMP 106400 cams 234*/232* @ .050", .475"/.450", 114* LS - Abaco 97B w/ custom 4.5" pipe - Accufab TB - FRPP 30lbrs. - Aviator pump - ARH 1.75" longtubes w/ 2.5" X and more...

User avatar
Ryan Skaggs
Private
Private
Posts: 2
Joined: Fri May 06, 2011 9:36 pm
Location: Peoria, Illinois
Contact:

Re: Bazooka meter info

Postby Ryan Skaggs » Sun May 08, 2011 9:59 pm

Figured out what my issue is. The Pro-M meter I have is a 4 pin setup, so naturally that code is going to pop up. The car runs great with the meter, regardless, but I'd like to get my Abaco meter back on the car... something went bad on it, as the car won't stay running with the same injector calibration as the Pro-M (01SVT 30lb.). I've read there's been some issues with the Abaco meters, but they're taking care of it apparently.

One thing I found while looking around, was guys cutting the IAT wires and running a Lightning IAT sensor... this is another option, in my case. With a diablo predator hooked up and displaying data, the IAT is locked in @ 100 degrees.

The light stays off until I start the car again, so for the time being... I just clear the code out right after I shut the car off, that way when I fire it up the light isn't on for the duration of crusing around. And I want to reiterate the fact that the car is running very strong now, with the Commando tune-up... it settles into 12.9-13.1 @ WOT and has a ton more midrange and throttle response. Amazing.

I'm going to spend some more time on the motor and then start tuning for nitrous hits again... it's been a while since the car's been on the jug.
2003 mach 1 - Aluminator w/ COMP 106400 cams 234*/232* @ .050", .475"/.450", 114* LS - Abaco 97B w/ custom 4.5" pipe - Accufab TB - FRPP 30lbrs. - Aviator pump - ARH 1.75" longtubes w/ 2.5" X and more...


Return to “Bazooka MAF Meters”

Who is online

Users browsing this forum: No registered users and 1 guest

cron