Upgraded injectors

Have a question or in need of assistance?
Post Reply
Fordranger331
Private First Class
Private First Class
Posts: 15
Joined: Tue Jan 12, 2016 9:10 pm

Upgraded injectors

Post by Fordranger331 » Fri May 11, 2018 10:30 pm

I upgraded to 24lb injectors and cant get it to run right it feels like to bogs through most rpms

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 559
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: Upgraded injectors

Post by Sniper Chris » Mon May 14, 2018 1:08 pm

What is the year, make and model of the vehicle?
What MAF meter is on the vehicle?
Is the MAF meter calibrated for the 24# injectors or calibrated for stock injectors?
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

Fordranger331
Private First Class
Private First Class
Posts: 15
Joined: Tue Jan 12, 2016 9:10 pm

Re: Upgraded injectors

Post by Fordranger331 » Mon May 14, 2018 7:14 pm

2000 Ford Explorer 5.0 and the maf is Stock calibrated for I believe the stock 17 lb injectors

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 559
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: Upgraded injectors

Post by Sniper Chris » Tue May 15, 2018 9:31 am

Hmm, simple enough. The software should have made a good tune.
Probably silly questions, but:
In the software, you're selecting "Stock" for the maf calibration, right?
In the software, you're selecting "24 lbs" for the injector size, right?

Do you have any other modifications done to the engine?
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

Fordranger331
Private First Class
Private First Class
Posts: 15
Joined: Tue Jan 12, 2016 9:10 pm

Re: Upgraded injectors

Post by Fordranger331 » Tue May 15, 2018 12:48 pm

I have the commando tuning software but I did leave all of the maf configuration alone all I changed was the injector high and allow slopes and breakpoint

User avatar
Sniper Chris
General of the Army
General of the Army
Posts: 559
Joined: Fri Jul 20, 2007 3:54 pm
Location: Sanford, FL
Contact:

Re: Upgraded injectors

Post by Sniper Chris » Wed May 16, 2018 11:10 am

I'm guessing you have 24 entered for High slope and 27 entered for low slope (or close to it)? If so, then something else may be causing the "bogging". Any other modifications done to the vehicle?
Director of Sales & Marketing
Technical Support

407.321.5725
www.DeltaForceTuning.com

Fordranger331
Private First Class
Private First Class
Posts: 15
Joined: Tue Jan 12, 2016 9:10 pm

Re: Upgraded injectors

Post by Fordranger331 » Wed May 16, 2018 1:12 pm

The only real upgrade I have is a cam very similar to an e303 Ford camshaft and a full 2 1/2 exhaust with flow masters

Rich A
Private First Class
Private First Class
Posts: 19
Joined: Thu Jul 16, 2015 7:25 pm

Re: Upgraded injectors

Post by Rich A » Wed May 16, 2018 10:12 pm

I would start building the tune using the Special Forces software and
then download it into your Explorer.
If that fixes the bogging issue then you know it’s the number you put
into the Commando software.
HTH

Fordranger331
Private First Class
Private First Class
Posts: 15
Joined: Tue Jan 12, 2016 9:10 pm

Re: Upgraded injectors

Post by Fordranger331 » Thu May 17, 2018 7:46 am

I was hoping to find someone to pay to tune it for me but there’s no one local thanks

Rich A
Private First Class
Private First Class
Posts: 19
Joined: Thu Jul 16, 2015 7:25 pm

Re: Upgraded injectors

Post by Rich A » Fri May 18, 2018 6:13 pm

PM sent

Post Reply

Return to “Commando - Delta Forces Help”