Search found 383 matches

by sniperpat469
Wed Jan 22, 2014 11:56 am
Forum: Commando - Delta Forces Help
Topic:
Replies: -1
Views:

Re: Getting rid of lean tip in with throttle increase

up to 10 % on trim is considered pretty good... It your AFR going too lean..?

I will usually set air man volume up to 11-15 for this configuration and even take away one number from low slope to help....

If the AFR is not being stupid I would leave it alone.

PS
by sniperpat469
Mon Jan 06, 2014 2:23 pm
Forum: 1996 - 2004 Mustang and Cobra
Topic:
Replies: -1
Views:

Re: 97 DOHC, Vortech, 39lb injectors, Lightning MAF

wow you have done a lot of tunes.. from what you are describing it dosent seen to be a tuning issue espically when you pull the maf plug and it gets better ,, and the wild swinging of the AFR , has this wire harness ever been replaced or changed. are all trhe grounds on the harness good.. Very wierd...
by sniperpat469
Thu Sep 01, 2011 3:14 pm
Forum: Special Forces Help
Topic: Returning to stock doesn't restore bullet
Replies: 3
Views: 968

Re: Returning to stock doesn't restore bullet

If you flashed the stock tune in it is stock, if the bullet did not come back that can be a different problem

PS
by sniperpat469
Thu Feb 24, 2011 10:19 am
Forum: WRX
Topic: Sniper commando WRX
Replies: 14
Views: 8036

Re: Sniper commando WRX

never made the tool for flashing , if you want to get the tool on line and use our software it will load into your commando.

PS
by sniperpat469
Thu Jan 06, 2011 10:15 am
Forum: Special Forces Getting Started
Topic: Special Forces full review walkthrough with pictures!
Replies: 33
Views: 28581

Re: Special Forces full review walkthrough with pictures!

That is our old Packaging , the new packaging comes with a carrying case.

PS
by sniperpat469
Wed Apr 21, 2010 8:52 am
Forum: 1996 - 2004 Mustang and Cobra
Topic: Meth Setup
Replies: 2
Views: 812

Re: Meth Setup

I would leave the IAT alone.no real reason to move it .

PS
by sniperpat469
Tue Apr 13, 2010 11:02 am
Forum: Special Forces Help
Topic: Interface Freezes During Stock Program Download
Replies: 19
Views: 1536

Re: Interface Freezes During Stock Program Download

I think this was the main problem

"I turned the key upwards but not enough to trigger the accessories or the starter"

you need to turn the key until the dash lights come on it

the key need to be in the run position but dont crank the car.

PS
by sniperpat469
Fri Apr 09, 2010 11:47 pm
Forum: F-Series Gas
Topic: 04 F150 w/ 5.4
Replies: 17
Views: 4127

Re: 04 F150 w/ 5.4

call sniper they will help

PS
by sniperpat469
Fri Apr 09, 2010 8:43 am
Forum: F-Series Gas
Topic: 04 F150 w/ 5.4
Replies: 17
Views: 4127

Re: 04 F150 w/ 5.4

OK your version will not work with the 04 f150 , you will need to send in the interface and get the V14\19 upgrade.

PS
by sniperpat469
Thu Apr 08, 2010 9:26 am
Forum: F-Series Gas
Topic: 04 F150 w/ 5.4
Replies: 17
Views: 4127

Re: 04 F150 w/ 5.4

what year is the f150 .

PS
by sniperpat469
Wed Apr 07, 2010 9:16 am
Forum: F-Series Gas
Topic: 04 F150 w/ 5.4
Replies: 17
Views: 4127

Re: 04 F150 w/ 5.4

the version should be , 12,13 14, 23


PS
by sniperpat469
Mon Apr 05, 2010 9:44 am
Forum: F-Series Gas
Topic: 04 F150 w/ 5.4
Replies: 17
Views: 4127

Re: 04 F150 w/ 5.4

depending on the version kit you have, you may need to send it in for an update. Is there an sticker on the Interface box with a hand written number?
PS
by sniperpat469
Fri Feb 05, 2010 2:14 pm
Forum: Lounge
Topic: Post polls on other sites...
Replies: 13
Views: 2594

Re: Post polls on other sites...

Funny true tuning story,,, Way back in 1986 there was a company hacking ecu Making performance chips for GM , Buick they were located in NJ Turbo Tune was the name of the company in fact this company was also making some chips for Hypertech in Tennessee. the owner of the NJ company eventually went t...
by sniperpat469
Tue Oct 27, 2009 11:33 am
Forum: RX-8
Topic: sniper commando RX8
Replies: 10
Views: 4217

Re: sniper commando RX8

same reply as the 6 I thought Bully dog had it done already. we have put the whole project on the back burner and have done more development on the MX5 mazda instead, the mx5 customers did step up with the pre orders and we delivered the product. and supporting that mazda from 2006-2009 model has ke...
by sniperpat469
Tue Sep 15, 2009 9:34 am
Forum: Special Forces Feature Request
Topic: Vista x64 drivers
Replies: 6
Views: 3756

Re: Vista x64 drivers

call sniper ask for sam , he will hook you up with the 64 bit drivers

PS
by sniperpat469
Thu Sep 10, 2009 5:09 pm
Forum: Korea Tuners
Topic: Hyundai Tuning
Replies: 3
Views: 2944

Re: Hyundai Tuning

We may have something for you , not sure when .

PS
by sniperpat469
Wed Jun 10, 2009 2:28 pm
Forum: 350Z
Topic: 350 Z tuning
Replies: 19
Views: 4698

Re: 350 Z tuning

Thats a good idea , let us see one of the ECUs you need done we can set up a flash bench for it.

PS
by sniperpat469
Wed Jun 10, 2009 1:27 pm
Forum: 350Z
Topic: 350 Z tuning
Replies: 19
Views: 4698

Re: 350 Z tuning

No progress on making retail tools, there dosent seem to be too much demand.

However if there is a calibration necessary we Could be ready to recalibrate but it would
require the ECU be sent here as retail tools would not be available.

PS
by sniperpat469
Fri May 15, 2009 3:49 pm
Forum: 350Z
Topic: 350 Z tuning
Replies: 19
Views: 4698

Re: 350 Z tuning

Mike

we can do this just a couple tools we need to purchase

PS
by sniperpat469
Tue Mar 31, 2009 9:20 am
Forum: WRX
Topic: Screen Shot Subaru Tuning Software
Replies: 14
Views: 6844

Re: Screen Shot Subaru Tuning Software

I have put a hold on this project but yes the interface is different

PS

Go to advanced search

cron